| Customization: | Available |
|---|---|
| Conditions of Use: |
Land Use |
| Usage: | Emergency Crew, Standby Unit, Common Units |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HGM9200 / 9300/9400 series power plant automation controllers for single diesel generator set automation and monitoring system, automatic start / stop, data measurement, police protection and "three remote" feature. Large-screen LCD graphics controller (LCD) monitors, can display Chinese, English and other languages, simple, reliable operation.
HGM9200 / 9300/9400 series power plant automation controller with 32-bit microprocessor technology to achieve a precise measurement of various parameters, setpoint adjustment and timing, threshold setting and other functions, most of the parameters can be adjusted from the controller front panel, All parameters can be used to adjust the PC via the USB interface, but also the use of a PC via RS485 interface or Link adjustment and monitoring. Its compact structure, simple wiring, high reliability, and can be widely applied to various types of generators automation systems.
Performance and Features
HGM9X10: for stand-alone automated, since the stop signal control via remote power generators;
HGM9X20: HGM9X10 based on the increase in electricity consumption monitoring and mains / generator automatic switching control function (AMF), especially suitable for stand-alone automated systems all the way along the mains unit composition.
Its main features are as follows:
1. The use of 32-bit ARM microcontrollers, hardware integration, high reliability has been further improved;
2. LCD LCD is 132x64, with backlight, Chinese, English and other languages optional interface operation, and can be on-site options to facilitate plant commissioning test machine;
3. The screen protection screen with a hard acrylic material, better wear and scratch resistance;
4. The use of silicone panel and buttons, to adapt to high and low temperature environment stronger;
5. With RS485 communication interface, the use of MODBUS protocol can achieve the "three remote" function; (need to use a controller with RS485 interface);
6. With SMS function, you can automatically send an alarm message to 5 phone numbers set the alarm when the generator set can also be used to control the turbine generator set status and access through SMS; (need to use a controller with a GSM interface) ;
7. With CAN BUS interface, you can connect with the J1939 EFI machine can not only monitor the common data EFI machines (such as water temperature, oil pressure, speed, fuel consumption, etc.), or by CANBUS interface control starting, stopping, acceleration and deceleration, etc. (need to use controller with CAN BUS interface);
8. suitable for three-phase four-wire, three-phase three-wire, single-phase two-wire, two-phase three-wire (120 / 240V) power 50 / 60Hz system;
9. collect and display mains / generator phase voltage, phase current, frequency, power parameters;
10. Mains with overvoltage, undervoltage, over frequency, under frequency, phase, reverse phase sequence function, generating over-voltage, under voltage, over frequency, under frequency, over current, over power, reverse power, phase , reverse phase sequence function;
11. Three fixed analog sensors (temperature, oil pressure, level);
12. Two programmable analog sensor can be set to the temperature or pressure or level sensors;
13. The precise collection of various parameters of the engine;
14. The control and protection functions: automatic diesel generator set start / stop, sub-gate (ATS switching) display and complete fault protection and other functions;
15. All outputs are relay outputs;
16. parameter settings: allows users to change the setting of its parameters, and memory in the internal FLASH memory, when the system is powered down it will not be lost. Most of the parameters can be adjusted from the front control panel, all parameters can be used to adjust the PC via the USB interface, but also the use of a PC via RS485 interface adjustments;
17. A variety of temperature, pressure, oil level sensor curve can be used directly, and custom sensor curve;
18. A variety of starting conditions (speed sensor, hydraulic, power generation) option;
19. Power supply a wide range (8 ~ 35) VDC, can adapt to different starting battery voltage environments;
20. The historical record, real time clock, timer switch (monthly / weekly / boot once a day and can be set with or without load) function;
21. The pump unit can be used, but also can indicate the use of the instrument (only indication, alarm, relay no action);
22. have a maintenance function, maintenance time can be set to the action (warning or alarm shutdown only);
23. All parameters are used in digital adjustment, eliminating the conventional analog potentiometer adjustment method to improve the reliability and stability of the machine;
24. The design of rings of rubber seal between the housing and the control panel, waterproof up to IP55;
25. Fixed controller with a clamp metal clamps, excellent performance at high temperatures;
26. The modular design, fire-retardant ABS shell, removable terminal blocks, embedded installation, compact, easy to install.
Q1: Are you a factory or trading company?
A1: We are a factory, we can guarantee our price is first-hand, very cheap and competitive.
Q2: How does your factory do regarding quality control?
A2: All the products will be 100% checked before the shipment.
Q3: When can I get the price?
A3:Usually we quote within 24 hours after we get your inquiry.
Q4: How could I get a sample?
A4: if you can not buy our product in your local area, we will ship a sample to you.You will be charged a sample price plus all related shipping costs.Express delivery charge depends on the quantity of the samples.
Q5: What is the price of shipping?
A5: Depending upon the port of delivery, prices varies.
){kind=link}